Magnaflow HONDA CR-Z Stainless Cat-Back System PERFORMANCE E User Manual

Browse online or download User Manual for For the car Magnaflow HONDA CR-Z Stainless Cat-Back System PERFORMANCE E. MagnaFlow HONDA CR-Z Stainless Cat-Back System PERFORMANCE EXHAUST User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 1
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Step 1: (Carefully read all instructions
before installation) Begin removal of the OEM
exhaust system by unbolting the three hole flange
from the Catalytic Converter located at the front of
the vehicle and the two hole flange located at the
rear muffler junction. Remove the hangers from the
OEM isolators and remove the exhaust system. Be
careful not to damage the OEM rubber isolators and
save the OEM fasteners as they will be re-used to
mount the new system.
Step 2: Using the OEM fasteners install the new
system by bolting up the Inlet Resonator Assembly
to the Catalytic Converter and by fitting the welded
hanger into the OEM rubber isolator. Use the
supplied 1.75" U-Bolt assembly to loosely fasten the
Mid-Pipe Assembly to the Resonator Assembly and
fit the welded hangers into the OEM rubber isolators.
Install the Muffler Assembly in the same fashion.
Step 3: With all components mounted loosely,
adjust the system for overall aesthetics and
clearance of frame & bodywork. (MAGNAFLOW
recommends at least 1/2" of clearance between the
exhaust system and any body panels to prevent
heat-related body damage or fire.)
Step 4: Once a final position has been chosen for
the new system, evenly tighten all fasteners from
front to rear. The supplied band clamps must be
VERY tight to properly align the pipes and prevent
leaks (Approximately 25-30ft-lbs). Inspect all
fasteners after 25-50 miles of operation and
retighten if necessary.
Mufflers, Converters,
Systems and Tips
INSTALLATION INSTRUCTIONS
15491
2011 Honda CR-Z 1.5L
Warning: When working on, under, or around
any vehicle exercise caution. Please allow the
vehicle's exhaust system to cool before removal,
as exhaust system temperatures may cause
severe burns. If working without a lift, always
consult vehicle manual for correct lifting
specifications. Always wear safety glasses and
ensure a safe work area. Serious injury or death
could occur if safety measures are not followed.
** Magnaflow Performance Exhaust recommends professional
installation on all their products
Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688
Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500
07/26/11
RESONATOR
ASSY
MID-PIPE
ASSY
MUFFLER
ASSY
Page view 0
1

Summary of Contents

Page 1 - 2011 Honda CR-Z 1.5L

Step 1: (Carefully read all instructions before installation) Begin removal of the OEM exhaust system by unbolting the three hole flange from the Cata

Comments to this Manuals

No comments