Magnaflow FORD FUSION Stainless Cat-Back System PERFORMANCE User Manual download pdf

Step 1: Begin removing your OEM exhaust system

by first unfastening the two bolt flange at the outlet of

the catalytic converters. Working front to rear loosen

the clamps holding the exhaust system together and

detach all hangers from the rubber insulators. Retain

the insulators and fasteners as they will be used to

install your new exhaust system. Remove the system

from the vehicle.

Step 2: Install your new MAGNAFLOW system by

first attaching the Resonator Assembly to the catalytic

converter outlet using the OEM fasteners. Next, slip

the Extension Pipe Assemblies onto the Resonator

Assembly in the specified order and secure using the

supplied 2.50" clamps. Install the Muffler Assembly in

a similar fashion and locate all hangers into the

rubber insulators.

Step 3: With all components mounted loosely, adjust

the system for overall aesthetics and clearance of

frame & bodywork. (MAGNAFLOW recommends at

least 1/2" of clearance between the exhaust system

and any body panels to prevent heat-related body

damage or fire.)

Step 4: Once a final position has been chosen for the

new system, evenly tighten all fasteners from front to

rear. The supplied band clamps must be VERY tight

to properly align the pipes and prevent leaks

(Approximately 40ft-lbs). Inspect all fasteners after

25-50 miles of operation and retighten if necessary.

Mufflers, Converters,

Systems and Tips

INSTALLATION INSTRUCTIONS

15202

2013 Ford Fusion 2.0L Turbo

Warning: When working on, under, or around

any vehicle exercise caution. Please allow the

vehicle's exhaust system to cool before removal,

as exhaust system temperatures may cause

severe burns. If working without a lift, always

consult vehicle manual for correct lifting

specifications. Always wear safety glasses and

ensure a safe work area. Serious injury or death

could occur if safety measures are not followed.

** Magnaflow Performance Exhaust recommends professional

installation on all their products

Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688

Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500

11/14/12

Rev: 000

Resonator

Assy

Extension Pipe "B"

Assy

[3] 2.50"

Clamps

Extension Pipe "A"

Assy

Muffler

Assy

2013 Ford Fusion 2.0L Turbo 1

Summary of Contents

Page 1 - 2013 Ford Fusion 2.0L Turbo

Step 1: Begin removing your OEM exhaust system by first unfastening the two bolt flange at the outlet of the catalytic converters. Working front to re

Comments to this Manuals

No comments

Magnaflow FORD FUSION Stainless Cat-Back System PERFORMANCE User Manual

Browse online or download User Manual for For the car Magnaflow FORD FUSION Stainless Cat-Back System PERFORMANCE . MagnaFlow FORD FUSION Stainless Cat-Back System PERFORMANCE EXHAUST User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Magnaflow FORD FUSION Stainless Cat-Back System PERFORMANCE