Magnaflow LAND ROVER TRUCK RANGE ROVER Stainless Cat-Back Sy User Manual download pdf

Step 1:(Carefully read all instructions

before installation). To remove your OEM

exhaust system, begin by unfastening the

resonator assembly from the catalytic converter

and remove the hangers from the rubber

insulators. You will need to remove the rest of

the system in a similar fashion to install your

new MAGNAFLOW performance exhaust

system.

Step 2: Install your new exhaust system by

fastening the resonator assembly to the catalytic

converter using the supplied 2.50" U-bolts and

locate the hanger to the rubber insulator. Next,

slip the inlet of the mid pipes over the outlet of

the resonator assembly, using the supplied

2.50" clamps to secure. Install the muffler

assembies in similar fashion.

Step 3: With all components mounted loosely,

adjust the system for overall aesthetics and

clearance of frame & bodywork. (MAGNAFLOW

recommends at least 1/2" of clearance between

the exhaust system and any body panels to

prevent heat-related body damage or fire.)

Step 4: Once a final position has been chosen

for the new system, evenly tighten all fasteners

from front to rear. The supplied band clamps

must be VERY tight to properly align the pipes

and prevent leaks (Approximately 40ft-lbs).

Inspect all fasteners after 25-50 miles of

operation and retighten if necessary.

Mufflers, Converters,

Systems and Tips

INSTALLATION INSTRUCTIONS

15266

2013 Range Rover 5.0L

Warning: When working on, under, or around

any vehicle exercise caution. Please allow the

vehicle's exhaust system to cool before removal,

as exhaust system temperatures may cause

severe burns. If working without a lift, always

consult vehicle manual for correct lifting

specifications. Always wear safety glasses and

ensure a safe work area. Serious injury or death

could occur if safety measures are not followed.

** Magnaflow Performance Exhaust recommends professional

installation on all their products

Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688

Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500

07/01/13

Rev: 000

RESONATOR ASSY

D/S MID PIPE

P/S MID PIPE

P/S MUFFLER ASSY

D/S MUFFLER ASSY

[4] 2.50" CLAMPS

[2] 2.50" U-BOLT

2013 Range Rover 5.0L 1

Summary of Contents

Page 1 - 2013 Range Rover 5.0L

Step 1:(Carefully read all instructions before installation). To remove your OEM exhaust system, begin by unfastening the resonator assembly from the

Comments to this Manuals

No comments

Magnaflow LAND ROVER TRUCK RANGE ROVER Stainless Cat-Back Sy User Manual

Browse online or download User Manual for For the car Magnaflow LAND ROVER TRUCK RANGE ROVER Stainless Cat-Back Sy. MagnaFlow LAND ROVER TRUCK RANGE ROVER Stainless Cat-Back System PERFORMANCE EXHAUST User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Magnaflow LAND ROVER TRUCK RANGE ROVER Stainless Cat-Back Sy