Magnaflow CHEVROLET TRUCK C10 PICKUP Stainless Cat-Back Syst User Manual download pdf

Step 1:(Carefully read all instructions before

installation) Remove the existing exhaust system

from the exhaust manifolds / headers. Some

systems may need to be cut for removal.

Step 2: Place the hanger in the existing hole (drill

in holes if necessary), and fasten using the

supplied hardware. Install the supplied rubber

insulators and hang the mufflers in place. (See

Figure 1)

Step 3: While the mufflers are hanging, install the

X-pipe assembly using the supplied 2.50" clamp.

Next position and install the front inlet pipe

extensions with the 2.50" clamp.

Step 4: The inlet pipe extensions can be cut on

both ends to accommodate different header and

manifold spreads. From these pipes, header

connectors flanges can be welded or custom

manifold down pipes can be attached.

Step 5: Install the tail pipe extentions to the over

top axle muffler pipes, using the supplied

fasteners. Next install your choice of tailpipe exits

with the supplied fasteners and hangers mounted

in a similar fashion as the mufflers (See Figure 2).

You also have the option to install tips on the end

of your tailpipe exits, which will need to be welded

on.

Mufflers, Converters,

Systems and Tips

INSTALLATION INSTRUCTIONS

15222

'47 - '54 Chevrolet Pick Up

Warning: When working on, under, or around

any vehicle exercise caution. Please allow the

vehicle's exhaust system to cool before removal,

as exhaust system temperatures may cause

severe burns. If working without a lift, always

consult vehicle manual for correct lifting

specifications. Always wear safety glasses and

ensure a safe work area. Serious injury or death

could occur if safety measures are not followed.

** Magnaflow Performance Exhaust recommends professional

installation on all their products

Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688

Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500

March 20, 2013

Rev: 000

INLET PIPE

EXT. D/S

[8] 2.50"

CLAMPS

X-PIPE ASSY

MUFFLER ASSY

P/S

MUFFLER ASSY

D/S

TAIL PIPE

EXT. P/S

TAIL PIPE

EXT. D/S

TIP OPTIONAL

TAIL PIPE

OPTIONS

TAIL PIPE

OPTIONS

[4] THREADED

HANGER

INLET PIPE

EXT. P/S

1 2

INSTALLATION INSTRUCTIONS 1

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

Step 1:(Carefully read all instructions before installation) Remove the existing exhaust system from the exhaust manifolds / headers. Some systems ma

Page 2

Step 7: With all components mounted loosely, adjust the system for overall aesthetics and clearance of frame & bodywork. (MAGNAFLOW recommends at

Comments to this Manuals

No comments

Magnaflow CHEVROLET TRUCK C10 PICKUP Stainless Cat-Back Syst User Manual

Browse online or download User Manual for For the car Magnaflow CHEVROLET TRUCK C10 PICKUP Stainless Cat-Back Syst. MagnaFlow CHEVROLET TRUCK C10 PICKUP Stainless Cat-Back System PERFORMANCE EXHAUST User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Magnaflow CHEVROLET TRUCK C10 PICKUP Stainless Cat-Back Syst