Magnaflow FORD DIESEL 6.7L DIESEL, 4in DUAL Aluminized Pro S User Manual download pdf

Step 1: First un-bolt the OEM exhaust from the

catalytic converter at the 3 bolt flange. You can

now disengage the welded hangers from the

rubber insulators and remove the exhaust

system from the vehicle. Do not damage the

OEM rubber insulators, as they will be reused to

mount the new system. You may also cut the

tailpipe behind the muffler to aid in removal of

the system.

Step 2: Install the flanged inlet pipe to the

catalytic converter outlet. Crew Cab and Long

Bed (CC/LB) models require the 19" Extension

Pipe, shorter vehicles will now use the Mid-Pipe

Assembly and appropriate clamps. Leave all

clamps loose for final adjustment of the

complete system. Tailpipe Assembly in a similar

fashion using the supplied 4.00" clamp and by

fitting the welded hangers into the rubber

insulators.

Step 3: With all components mounted loosely,

adjust the system for overall aesthetics and

clearance of frame & bodywork. (MAGNAFLOW

recommends at least 1/2" of clearance between

the exhaust system and any body panels to

prevent heat-related body damage or fire.)

Step 4: Once a final position has been chosen

for the new system, evenly tighten all fasteners

from front to rear. The supplied band clamps

must be VERY tight to properly align the pipes

and prevent leaks (Approximately 40ft-lbs).

U-bolt clamps should be tightened to

approximately 30-35ft-lbs. Inspect all fasteners

after 25-50 miles of operation and retighten if

necessary.

Mufflers, Converters,

Systems and Tips

INSTALLATION INSTRUCTIONS

18948

2011 Ford F-Series 6.7L Diesel

Warning: When working on, under, or around

any vehicle exercise caution. Please allow the

vehicle's exhaust system to cool before removal,

as exhaust system temperatures may cause

severe burns. If working without a lift, always

consult vehicle manual for correct lifting

specifications. Always wear safety glasses and

ensure a safe work area. Serious injury or death

could occur if safety measures are not followed.

** Magnaflow Performance Exhaust recommends professional

installation on all their products

Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688

Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500

Nov 29, 2012

REV: 000

INLET PIPE

3X 4.00"

CLAMPS

EXTENSION PIPE

MID-PIPE ASSY

TAIL PIPE ASSY

INSTALLATION INSTRUCTIONS 1

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

Step 1: First un-bolt the OEM exhaust from the catalytic converter at the 3 bolt flange. You can now disengage the welded hangers from the rubber ins

Comments to this Manuals

No comments

Magnaflow FORD DIESEL 6.7L DIESEL, 4in DUAL Aluminized Pro S User Manual

Browse online or download User Manual for For the car Magnaflow FORD DIESEL 6.7L DIESEL, 4in DUAL Aluminized Pro S. MagnaFlow FORD DIESEL 6.7L DIESEL, 4in DUAL Aluminized Pro Series Diesel PERFORMANCE EXHAUST User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Magnaflow FORD DIESEL 6.7L DIESEL, 4in DUAL Aluminized Pro S