Magnaflow FORD DIESEL 7.3L DIESEL, 4in Aluminized Pro Series User Manual download pdf

Step 1: (Carefully read all instructions before

installation) Unbolt the clamp fastening the muffler

inlet to the catalytic converter. You can now

disengage the welded hangers from the rubber

insulators and remove the muffler and tailpipe.

Step 2: Install the new intermediate pipe by

fastening it to the catalytic converter using the

supplied 3.50" clamp, making sure the large notch is

lined up with the peg on the catalytic converter.

Leave all clamps and fasteners loose for final

adjustment of the complete system. The 18"

extension pipe is required for CC/LB models, shorter

trucks will not need it. Install the muffler and tailpipe

pieces using the supplied clamps and hanger

clamps as shown. The shorter hanger clamp is to be

used in the middle of the intermediate pipe, and the

longer hanger clamp should be used at the muffler

inlet.

Step 3: With all components mounted loosely,

adjust the system for overall aesthetics and

clearance of frame & bodywork. (MAGNAFLOW

recommends at least 1/2" of clearance between the

exhaust system and any body panels to prevent

heat-related body damage or fire.)

Step 4: Once a final position has been chosen for

the new system, evenly tighten all fasteners from

front to rear. The supplied band clamps must be

VERY tight to properly align the pipes and prevent

leaks (Approximately 40ft-lbs). U-bolt clamps should

be tightened to approximately 30-35ft-lbs. Inspect all

fasteners after 25-50 miles of operation and

retighten if necessary.

Mufflers, Converters,

Systems and Tips

INSTALLATION INSTRUCTIONS

18951

1999 - Ford F-250 / F-350 - 6.0 / 7.3L V8

Warning: When working on, under, or around

any vehicle exercise caution. Please allow the

vehicle's exhaust system to cool before removal,

as exhaust system temperatures may cause

severe burns. If working without a lift, always

consult vehicle manual for correct lifting

specifications. Always wear safety glasses and

ensure a safe work area. Serious injury or death

could occur if safety measures are not followed.

** Magnaflow Performance Exhaust recommends professional

installation on all their products

Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688

Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500

Nov 21, 2012

Rev: 000

18" EXTENSION

PIPE

MUFFLER

"T" CLAMP

TAILPIPE

EXTENSION

TAILPIPE

4.00" CLAMP

3.50" CLAMP

HANGER CLAMP

INTERMEDIATE PIPE

HANGER CLAMP

INSTALLATION INSTRUCTIONS 1

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

Step 1: (Carefully read all instructions before installation) Unbolt the clamp fastening the mufflerinlet to the catalytic converter. You can now dise

Comments to this Manuals

No comments

Magnaflow FORD DIESEL 7.3L DIESEL, 4in Aluminized Pro Series User Manual

Browse online or download User Manual for For the car Magnaflow FORD DIESEL 7.3L DIESEL, 4in Aluminized Pro Series. MagnaFlow FORD DIESEL 7.3L DIESEL, 4in Aluminized Pro Series Diesel PERFORMANCE EXHAUST User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Magnaflow FORD DIESEL 7.3L DIESEL, 4in Aluminized Pro Series