Magnaflow NISSAN TRUCK TITAN Stainless Cat-Back System PERFO User Manual download pdf

Step 1: (Carefully read all instructions before

installation) To remove the OEM exhaust system,

you will first need to cut the pipe behind the muffler

before it goes over the axle. You can then disengage

the welded hangers from the rubber isolators and

remove the tailpipe. Unbolt the two inlet pipe

assemblies from the catalytic converter at the 2-bolt

flanges. Do not damage or discard the OEM

fasteners or rubber isolators, as they will be reused

to mount the new system. Disengage the muffler

hangers and remove it from the vehicle.

Step 2: Install the new inlet pipe assemblies at the

2-bolt flanges using the OEM fasteners. Leave all

clamps and fasteners loose for final adjustment of

the complete system. Install the Y-Pipe assembly

using the supplied 2.25" clamps. Install the muffler

assembly and tip in a similar fashion using the

supplied 2.5" clamp and by fitting the welded

hangers into the OEM rubber isolators.

Step 3: With all components still loose, adjust

the new system for overall aesthetics and clearanc

e of frame & bodywork. (MAGNAFLOW recomm

ends at least 1/2" of clearance between the exhaust

tip and any body panels to avoid heat related bod

ywork damage or fire.)

Step 4: Once a final position has been chosen

for the new system, evenly tighten all fasteners

from front to rear. Inspect all fasteners after 25-50 m

iles of operation and re-tighten if necessary.

Mufflers, Converters,

Systems and Tips

INSTALLATION INSTRUCTIONS

17109

2007 - 2010 Nissan Titan EC/CC 5.6L

Warning: When working on, under, or around

any vehicle exercise caution. Please allow the

vehicle's exhaust system to cool before removal,

as exhaust system temperatures may cause

severe burns. If working without a lift, always

consult vehicle manual for correct lifting

specifications. Always wear safety glasses and

ensure a safe work area. Serious injury or death

could occur if safety measures are not followed.

** Magnaflow Performance Exhaust recommends professional

installation on all their products

Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688

Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500

Oct. 5, 2010

Rev: 000

Tip

2X 2.5" Clamps

Inlet Pipe Assy D/S

Inlet Pipe Assy P/S

2X 2.25" Clamps

Y-Pipe Assy

Muffler Sub Assy

INSTALLATION INSTRUCTIONS 1

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

Step 1: (Carefully read all instructions before installation) To remove the OEM exhaust system, you will first need to cut the pipe behind the muffler

Comments to this Manuals

No comments

Magnaflow NISSAN TRUCK TITAN Stainless Cat-Back System PERFO User Manual

Browse online or download User Manual for For the car Magnaflow NISSAN TRUCK TITAN Stainless Cat-Back System PERFO. MagnaFlow NISSAN TRUCK TITAN Stainless Cat-Back System PERFORMANCE EXHAUST User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Magnaflow NISSAN TRUCK TITAN Stainless Cat-Back System PERFO