Magnaflow CHEVROLET CRUZE Stainless Cat-Back System PERFORMA User Manual download pdf

Step 1:(Carefully read all instructions before

installation) Begin removing the OEM exhaust

system from your vehicle by first unbolting the

exhaust inlet flange at the catalytic converter outlet.

Working front to rear remove all welded hangers from

the rubber isolators. Note that the system may need

to be cut to simplify the removal process. Retain all

mounting harware as it will be needed to install your

new MAGNAFLOW performance exhaust system.

Step 2: Begin installing your new system by first

loosely bolting the flange of the inlet pipe assembly to

the catalytic converter outlet flange. Next slip the

inlet of the Mid Pipe over the inlet pipes outlet,

loosely secure using the supplied clamp. Install

Muffler Sub Assembly and the Tail Pipe Assembly in

a similar fashion.

Step 3: With all components mounted loosely, adjust

the system for overall aesthetics and clearance of

frame & bodywork. (MAGNAFLOW recommends at

least 1/2" of clearance between the exhaust system

and any body panels to prevent heat-related body

damage or fire.)

Step 4: Once a final position has been chosen for the

new system, evenly tighten all fasteners from front to

rear. The supplied band clamps must be VERY tight

to properly align the pipes and prevent leaks

(Approximately 40ft-lbs). U-bolt clamps should be

tightened to approximately 30-35ft-lbs. Inspect all

fasteners after 25-50 miles of operation and retighten

if necessary.

Mufflers, Converters,

Systems and Tips

INSTALLATION INSTRUCTIONS

15070

2011 Chevrolet Cruze 1.4T/1.8L Single Exit

Warning: When working on, under, or around

any vehicle exercise caution. Please allow the

vehicle's exhaust system to cool before removal,

as exhaust system temperatures may cause

severe burns. If working without a lift, always

consult vehicle manual for correct lifting

specifications. Always wear safety glasses and

ensure a safe work area. Serious injury or death

could occur if safety measures are not followed.

** Magnaflow Performance Exhaust recommends professional

installation on all their products

Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688

Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500

Aug 23, 2011

Rev: 000

Inlet Pipe Assy.

Mid Pipe

Muffler Sub Assy.

Tail Pipe Sub Assy.

3X 2.25" Clamps

INSTALLATION INSTRUCTIONS 1

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

Step 1:(Carefully read all instructions before installation) Begin removing the OEM exhaust system from your vehicle by first unbolting the exhaust i

Comments to this Manuals

No comments

Magnaflow CHEVROLET CRUZE Stainless Cat-Back System PERFORMA User Manual

Browse online or download User Manual for For the car Magnaflow CHEVROLET CRUZE Stainless Cat-Back System PERFORMA. MagnaFlow CHEVROLET CRUZE Stainless Cat-Back System PERFORMANCE EXHAUST User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Magnaflow CHEVROLET CRUZE Stainless Cat-Back System PERFORMA