Magnaflow BMW 530I Stainless Cat-Back System PERFORMANCE EXH User Manual download pdf

Step 1:(Carefully read all instructions before

installation) Remove the OEM exhaust system by

first unbolting both inlet flanges behind the catalytic

converters. Disengage the hangers from the rubber

isolators. Be sure to retain all existing mounting

hardware as it will be needed to install your new

MAGNAFLOW performance exhaust system.

Step 2: Begin the installation process by first laying

out all the components of the new system to check

orientation and content. First bolt the Inlet flanges of

the inlet Muffler Sub Assembly to the outlet of the

catalytic converters. Slip the inlet pipes of the

resonator assembly over the outlet pipes on the inlet

muffler assembly, loosely secure with the supplied

clamps. Slip the inlet pipe of the tail pipe mufler

assembly over the outlet of the resonator assembly.

Loosely secure using the supplied clamp. Locate

hangers to the rubber isolators.

Step 3: With all components mounted loosely, adjust

the system for overall aesthetics and clearance of

frame & bodywork. (MAGNAFLOW recommends at

least 1/2" of clearance between the exhaust system

and any body panels to prevent heat-related body

damage or fire.)

Step 4: Once a final position has been chosen for the

new system, evenly tighten all fasteners from front to

rear. The supplied band clamps must be VERY tight

to properly align the pipes and prevent leaks

(Approximately 65ft-lbs). U-bolt clamps should be

tightened to approximately 30-35ft-lbs. Inspect all

fasteners after 25-50 miles of operation and retighten

if necessary.

Mufflers, Converters,

Systems and Tips

INSTALLATION INSTRUCTIONS

16550

2001 - 2003 BMW 530i 3.0L

Warning: When working on, under, or around

any vehicle exercise caution. Please allow the

vehicle's exhaust system to cool before removal,

as exhaust system temperatures may cause

severe burns. If working without a lift, always

consult vehicle manual for correct lifting

specifications. Always wear safety glasses and

ensure a safe work area. Serious injury or death

could occur if safety measures are not followed.

** Magnaflow Performance Exhaust recommends professional

installation on all their products

Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688

Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500

Mar 24, 2010

Rev: 000

Inlet Muffler Assy.

Resonator Assy.

Tail Pipe Muffler Assy.

2.50" Clamp

2X 2.00" Clamp

2001 - 2003 BMW 530i 3.0L 1

Summary of Contents

Page 1 - 2001 - 2003 BMW 530i 3.0L

Step 1:(Carefully read all instructions before installation) Remove the OEM exhaust system by first unbolting both inlet flanges behind the catalytic

Comments to this Manuals

No comments

Magnaflow BMW 530I Stainless Cat-Back System PERFORMANCE EXH User Manual

Browse online or download User Manual for For the car Magnaflow BMW 530I Stainless Cat-Back System PERFORMANCE EXH. MagnaFlow BMW 530I Stainless Cat-Back System PERFORMANCE EXHAUST User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Magnaflow BMW 530I Stainless Cat-Back System PERFORMANCE EXH